Three to seven layer co extrusion die traction rotary blown film machine
Category:
mechanical equipment/Plastic machinery/Film blowing machine
Model:
SJ-45×3/FM1000
Brand:
Jiansheng Machinery
model:
SJ-45×3/FM1000
Applicable raw materials:
LDPE
category:
PE blown film machine
Maximum bending diameter of thin film:
one thousand
Single side thickness of film:
0.02-0.20
production capacity:
one hundred and ten
Mold specifications:
Φ200
screw diameter:
Φ45
screw length-to-diameter ratio:
L/D 30:1
weight:
eighteen thousand
Place of Origin:
Ryan
manufacturer:
Jian Sheng
Retail Price
150,000.00USD
重量
kg
- Product Description
-
model SJ-45×3/FM1000
Applicable raw materials LDPE
category PE blown film machine
Maximum bending diameter of thin film one thousand
Single side thickness of film 0.02-0.20
production capacity one hundred and ten
Mold specifications Φ200
screw diameter Φ45
screw length-to-diameter ratio L/D 30:1
weight eighteen thousand
Place of Origin Ryan
manufacturer Jian Sheng
Description :
Product Description: SJ-45 × 3/FM1000, SJ-50 × 3/FM1200, SJ-55 × 3/FM1500
Three to seven layer co extrusion traction rotary blown film unit
Three-to-Seven-Layer Co-extruding Traction Rotation Blown Film Machine Group
Purpose:
1. The seven layer co extrusion die adopts internationally advanced stacked die heads. Each layer of the die head can be independently heated and contain insulation media, effectively insulating and facilitating the blowing of plastic films with large temperature differences. The advanced die structure and uniform distribution of flow channels ensure the stability of the fluid and the uniform thickness of the film.
2. The traction system adopts a horizontal ± 360 ° swinging rotation and uniform rotation. Meet the requirements of high-precision and high-speed printing. The IBC internal cooling system is currently at the international advanced level. The system uses four ultrasonic probes to calculate the measured information, and controls and adjusts the inlet and outlet air volume to ensure the stability of the membrane bubble size while replacing the hot air inside the membrane bubble. While increasing production volume, it greatly increases the transparency of the product and greatly enhances its added value. The fully automatic winding device has fully automatic control of winding, unwinding, cutting, and unloading. The photoelectric correction system makes winding more neat, improves work efficiency, reduces labor intensity for workers, and reduces the scrap rate during manual coil replacement.
3. The electrical control adopts PLC programmable control and computer centralized control platform with real-time display of parameters, achieving on-site intelligent control monitoring and remote parameterization; The function of storing product processing parameters greatly facilitates equipment operation, and the continuous automatic monitoring of machine functions and product data ensures product quality control, effectively saving material usage and reducing perceived interference. Remote control and management can be achieved through centralized computer control.
Main technical parameters:
model SJ-45×3/FM1000
SJ-50×3/FM1200
SJ-55×3/FM1500
screw diameter
Φ45mm
Φ50mm
Φ55mm
screw length-to-diameter ratio
L/D 30:1
L/D 30:1
L/D 30:1
screw speed
15-150r/min
15-150r/min
15-150r/min
Bubble cooling method Double air vent air ring MLLDPE, LLDPE, LDPE, EVA
Applicable raw materials Main motor power
11kw×3
15kw×3
18.5kw×3
Extrusion volume 110kg/h 125kg/h 150kg/h Single extruder output
30kg/h×3
35kg/h×3
40kg/h×3
Mold head specifications
Φ200mm
Φ250mm
Φ300mm
Film thickness single-sided
0.02-0.20mm
0.02-0.20mm
0.02-0.20mm
Film bending diameter
1000mm
1200mm
1500mm
Total electrical capacity
78kw
90kw
105kw
Electrical weight
About 18000kg
About 18000kg
About 20000kg
Overall dimensions
8800×4600×8000(mm)
9000×4800×8500(mm)
9700×5000×9000(mm)
AfterSalesService :
Key words:- Seven layer co extrusion blown film machine
More Products
