Strict quality inspection of cold storage shelves

Description :

　　Characteristics of cantilever shelf structure:

　　1. Cantilever shelves are divided into single arm and double arm types, which efficiently store similar products such as wood, pipes, and long strips. Cantilever shelves can be composed of multiple unit systems consisting of a single column unit and a continuous cantilever through horizontal and diagonal braces;

　　2. Cantilever shelves are effective storage systems in terms of quality, safety, and management. The column piece is composed of a column and a base. The column is made of two specially designed C-shaped steel welded together. This structure fully utilizes the material's load-bearing capacity and has the characteristics of high load-bearing capacity and low cost;

　　3. Prefabricated double row holes for the columns, with a pitch of 100mm. The cantilever is connected to the columns through plate pins and can be adjusted up and down with a pitch of 100mm.

　　The structural advantages of cantilever shelves:

　　1. Cantilever shelves can be single-sided or double-sided, and they have the characteristics of structural stability, good load-bearing capacity, and high space utilization. Goods storage and retrieval are carried out by forklifts, cranes, or manual labor;

　　2. The height of cantilever shelves is usually within 2.0 meters (up to 6 meters if accessed by forklifts), the cantilever length is within 1.5 meters, and the load capacity of each arm is usually within 800KG.

　　Cantilever shelves are commonly used in the mechanical manufacturing industry and building materials supermarkets. After adding shelves, it is particularly suitable for warehouses with small space and low height. It is easy to manage, has a wide view, and has a higher utilization rate than ordinary shelves. Cantilever shelves are made by installing external cantilevers on traditional shelf pillars, and are a type of long shelf.

　　Basic structure of cantilever shelf:

　　The column is made of two cold-rolled C-shaped profiles welded face to face. There are double row holes punched on the column with a pitch of 140 (50) mm, so the cantilever beam can be hung on it to adjust the height of each layer up and down. The length of the cantilever shelf can be freely matched, and customers can specify whether an end is required for the cantilever end. The end is divided into welded and plug-in types.

AfterSalesService :

• Cold storage shelves