Supply of medium-sized crossbeam shelves and heavy-duty shelves

Description :

　　Characteristics of crossbeam shelves

　　1. The beam type shelf structure is simple, safe and reliable, and can be adjusted and combined freely. It is not limited by the order of items in and out of the warehouse. Widely used in storage modes such as pallet storage and forklift access.

　　2. The post piece of the cross beam rack is composed of the post, cross brace and slant support connected by bolts. The shelf frame is composed of column pieces and C-shaped welded beams, which are fixed with safety pins and have a simple and reliable structure. Each layer can be freely adjusted up and down with a step distance of 75mm or 50mm.

　　3. The beam type shelf can determine the layer load requirements according to the size of the columns and beams, and has the characteristics of large moment of inertia, strong layer load capacity, and strong impact resistance. The maximum layer load per layer can reach 5000kg under relative design.

　　4. The height of a single column in a crossbeam style shelf can reach up to 12 meters, and the plasticity of a pallet shelf is very large. Based on the pallet shelf, mold shelves, attic shelves, three-dimensional warehouse shelves, etc. can be built, and special oil barrel shelves can also be made.

　　5. Cross beam shelves can effectively increase the storage height of the warehouse and improve the space utilization rate of the warehouse. Suitable for storing various types of goods.

　　Specification of commonly used welding beams for crossbeam shelves

　　Barrier: mainly used to support goods and disperse the gravity pressing on the beam. There are three common types of barriers: one character barrier, I-shaped barrier, and cross shaped barrier.

　　Protective measures are divided into ground protection and high-altitude protection.

　　Ground protection: Cross beam shelves are usually accessed by forklifts. Forklifts may collide with the shelves during daily walking or operation, making safety measures very necessary.

　　Ground protection includes foot protection and crash barriers. Protect the bottom of the column with foot protection. The anti-collision guardrail is installed at the end of the shelf, mainly used for forklifts to collide with the shelf while driving in the main aisle.

　　Beam shelves are essential storage devices in warehouses, with simple structures and easy disassembly and installation, and are highly favored by factories and enterprises for procurement. However, it is not uncommon for shelves to bend and deform. What are the reasons for this? What should I do if the shelf bends and deforms?

　　1. Use defective raw materials. Some unscrupulous merchants use defective steel to process and produce shelves in order to save costs. Although the thickness and size are the same, its load-bearing capacity cannot meet the requirements. Perhaps no problems can be seen in the short term, but after a period of use, the problems will be exposed, generally manifested as bending and deformation of the shelves, and in severe cases, they may even break.

　　2. The production process is not detailed enough. Some shelf manufacturers are not rigorous in every aspect of production, and a small detail that is not handled properly may also cause bending and deformation of the shelves. For example, if the size of the cutting and punching is not correct, pulling and pulling during installation may cause the shelves to tilt. Storing goods in such a situation may result in uneven stress, causing bending and deformation of the shelves, and even the breakage of shelf shelves and columns.

　　3. The goods were not stored with the required load-bearing capacity. After the design of each shelf, the shelf manufacturer will calibrate the load-bearing range of the shelf. If the actual storage of goods exceeds the maximum load-bearing capacity of the shelf or violates the principle of safe use of the shelf, it may cause the shelf to bend and deform.

　　4. Forklifts have collided multiple times. In some large shelving warehouses, it is normal for forklifts to transport palletized goods. However, due to the carelessness of forklift drivers, even if the shelves have been properly equipped with anti-collision pillars and protective barriers, collisions between forklifts and shelves cannot be avoided. Quality shelves may not bend or deform in the short term, but over time, they will certainly experience bending and deformation.

　　Cross beam shelving is currently a widely used type of shelving with strong versatility, which can adapt to various types of goods and adjust the height of the crossbeam according to the size requirements of the goods.

　　It is mainly composed of columns, beams, cross braces, slant support and self-locking bolts. The connection between the crossbeam and the column often adopts a mechanical locking structure, which can be disassembled and combined freely.

　　The crossbeam adopts a specially cold-rolled P-type closed beam; This structure has the characteristics of simplicity, reliability, light weight, strong bearing capacity, and low cost; The column clamp is equipped with a specially designed safety pin when connected to the column, which can ensure that the crossbeam will not fall off under external impact. Functional accessories such as partitions, steel laminates (wooden laminates), wire mesh layers, storage cage guides, oil drum racks, etc. can be installed according to the characteristics of the storage unit container equipment. According to the actual usage situation of users: pallet load requirements, pallet size, actual warehouse space, and actual lifting height of forklifts, different specifications of beam type heavy-duty shelves can be provided for customers to choose from.

　　Widely used in manufacturing, third-party logistics, and distribution centers, it is suitable for both multi variety small batch items and small variety large batch items.

AfterSalesService :

• Medium sized crossbeam shelving