Composite steel platform storage rack

Description :

　　The structural characteristics of steel platforms are fully assembled structures, flexible designs, and widely used in modern storage. Engineering structures made of steel, typically consisting of beams, columns, slabs, and other components made of steel sections and plates; The various parts are connected by welds, screws, rivets, etc.

　　Modern steel platform structures come in various forms and functions. The characteristic of its structure is a fully assembled structure. How much does it cost to build a steel platform in Yunnan? The cost of the steel platform is related, and the design is flexible. It can be designed and manufactured according to different site conditions to meet site requirements, functional requirements, and logistics requirements. It is widely used in modern storage.

　　In today's society, land is becoming increasingly precious and scarce. How to place as many goods as possible in limited space is a concern for many businesses. With the development of the times, the use of steel has become very common, and structures mainly made of steel are one of the main types of building structures currently in use.

　　Generally, ordinary operating platforms are composed of main beams, small beams, and planks due to their low load-bearing capacity and lack of equipment support. Steel platform beams are mainly made of hot-rolled ordinary section steel. When the span is large, section steel or welded I-beam composite beams can also be used, and they can be supported on the factory building and other structures with triangular frames, support brackets, or directly supported.

　　Heavy duty operating steel platforms have large loads, frequent operations, large platform areas, and large, medium, and small vibration loads directly placed on the steel platform. Their structure usually consists of independent column grids, main beams, secondary beams, small beams, and planks. The steel platform structure has an independent support system, which is connected laterally to the structural framework columns of the factory building to ensure the integrity of the steel platform structure.

　　Steel structure platform structure columns and inter column supports

　　Steel platform columns are generally designed as equal section columns. The commonly used forms of solid web columns include hot-rolled ordinary steel sections, I-beams reinforced with plates, or steel pipes with flanges. If necessary, it can also be designed as a combined column form composed of two channel steels.

　　Steel platform columns are generally designed as axial compression members. The aspect ratio of the column should not exceed 150, and the overall length can be assumed to be between 80-120. The upper and lower ends of the column are generally designed as hinged joints. For platform columns that bear large loads, the upper end should be designed as hinged joints and the lower end as rigid joints. The thickness of the column base plate is determined by calculating the bending moment generated by the back pressure of the column foundation on the base plate, but it should not be less than the small thickness of the column limb and 10mm. For workshops with obvious corrosion, it should be appropriately thickened. The stability of independent steel platform structures is generally ensured by the support between columns. The support should be arranged in the middle of the column.

　　Steel Structure Engineering Co., Ltd. provides you with Suzhou attic steel structure platform and steel structure staircase construction.

　　The design and construction of attic steel structure mainly targets: villa attic construction, villa steel structure with added steel stairs, steel reinforcement, two-story construction, building with additional floors, adding floors and roofs, duplex mezzanine attic, shop attic, loft, apartment type with added floors attic.

AfterSalesService :

• Composite steel platform storage rack