Wholesale of heavy-duty shelves

Description :

　　Cross beam shelving is currently a widely used type of shelving with strong versatility, which can adapt to various types of goods and adjust the height of the crossbeam according to the size requirements of the goods.

　　It is mainly composed of columns, beams, cross braces, slant support and self-locking bolts. The connection between the crossbeam and the column often adopts a mechanical locking structure, which can be disassembled and combined freely.

　　The crossbeam adopts a specially cold-rolled P-type closed beam; This structure has the characteristics of simplicity, reliability, light weight, strong bearing capacity, and low cost; The column clamp is equipped with a specially designed safety pin when connected to the column, which can ensure that the crossbeam will not fall off under external impact. Functional accessories such as partitions, steel laminates (wooden laminates), wire mesh layers, storage cage guides, oil drum racks, etc. can be installed according to the characteristics of the storage unit container equipment. According to the actual usage situation of users: pallet load requirements, pallet size, actual warehouse space, and actual lifting height of forklifts, different specifications of beam type heavy-duty shelves can be provided for customers to choose from.

　　Widely used in manufacturing, third-party logistics, and distribution centers, it is suitable for both multi variety small batch items and small variety large batch items.

　　Cross beam shelves are warehouse shelves designed for storing and retrieving palletized goods. Cross beam shelves consist of columns and crossbeams, and have a simple, safe, and reliable structure. It has the characteristics of high load-bearing capacity, wide adaptability range, mechanical access, high selection efficiency, arbitrary access, and high cost-effectiveness.

　　Beam shelves are essential storage devices in warehouses, with simple structures and easy disassembly and installation, and are highly favored by factories and enterprises for procurement. However, it is not uncommon for shelves to bend and deform. What are the reasons for this? What should I do if the shelf bends and deforms?

　　1. Use defective raw materials. Some unscrupulous merchants use defective steel to process and produce shelves in order to save costs. Although the thickness and size are the same, its load-bearing capacity cannot meet the requirements. Perhaps no problems can be seen in the short term, but after a period of use, the problems will be exposed, generally manifested as bending and deformation of the shelves, and in severe cases, they may even break.

　　2. The production process is not detailed enough. Some shelf manufacturers are not rigorous in every aspect of production, and a small detail that is not handled properly may also cause bending and deformation of the shelves. For example, if the size of the cutting and punching is not correct, pulling and pulling during installation may cause the shelves to tilt. Storing goods in such a situation may result in uneven stress, causing bending and deformation of the shelves, and even the breakage of shelf shelves and columns.

　　3. The goods were not stored with the required load-bearing capacity. After the design of each shelf, the shelf manufacturer will calibrate the load-bearing range of the shelf. If the actual storage of goods exceeds the maximum load-bearing capacity of the shelf or violates the principle of safe use of the shelf, it may cause the shelf to bend and deform.

　　4. Forklifts have collided multiple times. In some large shelving warehouses, it is normal for forklifts to transport palletized goods. However, due to the carelessness of forklift drivers, even if the shelves have been properly equipped with anti-collision pillars and protective barriers, collisions between forklifts and shelves cannot be avoided. Quality shelves may not bend or deform in the short term, but over time, they will certainly experience bending and deformation.

　　Cross beam shelving is a type of warehouse shelving that uses pallets as carriers to carry goods. Each pallet is a storage location, so it is also known as a pallet rack. The crossbeam shelf is mainly composed of column pieces and crossbeams. Simple structure, safe and reliable. We can provide different specifications of materials for customers to choose from based on factors such as pallet load capacity, pallet size, available warehouse area, and forklift lifting height.

　　The structure of a crossbeam rack. The crossbeam shelf consists of column pieces, crossbeams, safety pins, barriers, protective measures, connecting rods, aisle beams, etc.

　　Structure of crossbeam shelving

　　Column piece: It is composed of two columns, cross braces and slant support, and is locked by high-strength bolts.

AfterSalesService :

• Wholesale of heavy-duty shelves