Beam type shelving structure

Description :

　　Cross beam shelves are warehouse shelves designed for storing and retrieving palletized goods. Cross beam shelves consist of columns and crossbeams, and have a simple, safe, and reliable structure. It has the characteristics of high load-bearing capacity, wide adaptability range, mechanical access, high selection efficiency, arbitrary access, and high cost-effectiveness.

　　Beam type shelving:

　　1. Beam type shelving;

　　2. Tray style crossbeam shelving;

　　3. Narrow aisle style pallet and crossbeam shelving;

　　4. Heavy duty storage shelves;

　　5. Mobile crossbeam shelving;

　　6. Pull out crossbeam shelves, etc.

　　Characteristics of crossbeam shelves

　　1. The beam type shelf structure is simple, safe and reliable, and can be adjusted and combined freely. It is not limited by the order of items in and out of the warehouse. Widely used in storage modes such as pallet storage and forklift access.

　　2. The post piece of the cross beam rack is composed of the post, cross brace and slant support connected by bolts. The shelf frame is composed of column pieces and C-shaped welded beams, which are fixed with safety pins and have a simple and reliable structure. Each layer can be freely adjusted up and down with a step distance of 75mm or 50mm.

　　3. The beam type shelf can determine the layer load requirements according to the size of the columns and beams, and has the characteristics of large moment of inertia, strong layer load capacity, and strong impact resistance. The maximum layer load per layer can reach 5000kg under relative design.

　　4. The height of a single column in a crossbeam style shelf can reach up to 12 meters, and the plasticity of a pallet shelf is very large. Based on the pallet shelf, mold shelves, attic shelves, three-dimensional warehouse shelves, etc. can be built, and special oil barrel shelves can also be made.

　　5. Cross beam shelves can effectively increase the storage height of the warehouse and improve the space utilization rate of the warehouse. Suitable for storing various types of goods.

　　6. The crossbeam style shelf has a safer appearance and can prevent forklift collisions by adding column foot guards and anti-collision bars. For safer layer loading, auxiliary facilities such as beam supports, shelves, and mesh spans can also be installed on the beams.

　　7. Beam type shelves are low-cost, easy to install and operate, easy to locate, and suitable for any handling tool, making them a widely used type of shelf.

　　8. Cross beam shelves can also be equipped with layer boards, which can be steel plates, dense ammonia plates, or mesh grilles. In order to use trays of different sizes.

　　Specification of commonly used welding beams for crossbeam shelves

　　Barrier: mainly used to support goods and disperse the gravity pressing on the beam. There are three common types of barriers: one character barrier, I-shaped barrier, and cross shaped barrier.

　　Protective measures are divided into ground protection and high-altitude protection.

　　Ground protection: Cross beam shelves are usually accessed by forklifts. Forklifts may collide with the shelves during daily walking or operation, making safety measures very necessary.

　　Ground protection includes foot protection and crash barriers. Protect the bottom of the column with foot protection. The anti-collision guardrail is installed at the end of the shelf, mainly used for forklifts to collide with the shelf while driving in the main aisle.

AfterSalesService :

• Beam type shelving structure