Heavy duty storage shelves

Description :

　　Characteristics of crossbeam shelves:

　　1. Assembled structure, can be combined arbitrarily, easy and flexible to install and disassemble.

　　2. The column of the crossbeam rack is made of hot-rolled plates folded at multiple angles, and the load-bearing capacity of the crossbeam rack is high.

　　3. The crossbeam type shelf column is an assembled structure, and the crossbeam and column are connected by steel buckle card insertion, and are locked with a safety key to prevent falling.

　　4. The crossbeam style shelf columns are equipped with adjustable hole spacing every 75mm, which can be adjusted according to the height of the goods.

　　5. The crossbeam rack is suitable for storing materials at a high height and can fully utilize the space of the warehouse to achieve material classification management. It can be used in conjunction with forklifts or stackers.

　　Beam shelves are essential storage devices in warehouses, with simple structures and easy disassembly and installation, and are highly favored by factories and enterprises for procurement. However, it is not uncommon for shelves to bend and deform. What are the reasons for this? What should I do if the shelf bends and deforms?

　　1. Use defective raw materials. Some unscrupulous merchants use defective steel to process and produce shelves in order to save costs. Although the thickness and size are the same, its load-bearing capacity cannot meet the requirements. Perhaps no problems can be seen in the short term, but after a period of use, the problems will be exposed, generally manifested as bending and deformation of the shelves, and in severe cases, they may even break.

　　2. The production process is not detailed enough. Some shelf manufacturers are not rigorous in every aspect of production, and a small detail that is not handled properly may also cause bending and deformation of the shelves. For example, if the size of the cutting and punching is not correct, pulling and pulling during installation may cause the shelves to tilt. Storing goods in such a situation may result in uneven stress, causing bending and deformation of the shelves, and even the breakage of shelf shelves and columns.

　　3. The goods were not stored with the required load-bearing capacity. After the design of each shelf, the shelf manufacturer will calibrate the load-bearing range of the shelf. If the actual storage of goods exceeds the maximum load-bearing capacity of the shelf or violates the principle of safe use of the shelf, it may cause the shelf to bend and deform.

　　4. Forklifts have collided multiple times. In some large shelving warehouses, it is normal for forklifts to transport palletized goods. However, due to the carelessness of forklift drivers, even if the shelves have been properly equipped with anti-collision pillars and protective barriers, collisions between forklifts and shelves cannot be avoided. Quality shelves may not bend or deform in the short term, but over time, they will certainly experience bending and deformation.

　　Cross beam shelving, also known as pallet shelving, is generally stored in pallet units and is suitable for various warehouses. It is a simple and widely used form of shelving. Cross beam shelving is a widely used palletized cargo storage system with strong versatility. Its structure is that the shelves are divided into several rows along the width direction of the warehouse, with a harbor passage in between for stacking cranes, forklifts, or other handling machinery to operate. Each row of shelves is divided into several columns along the longitudinal direction of the warehouse, and further divided into several layers in the vertical direction, forming a large number of storage spaces for storing goods on pallets.

　　Characteristics of crossbeam shelves

　　1. The beam type shelf structure is simple, safe and reliable, and can be adjusted and combined freely. It is not limited by the order of items in and out of the warehouse. Widely used in storage modes such as pallet storage and forklift access.

　　2. The post piece of the cross beam rack is composed of the post, cross brace and slant support connected by bolts. The shelf frame is composed of column pieces and C-shaped welded beams, which are fixed with safety pins and have a simple and reliable structure. Each layer can be freely adjusted up and down with a step distance of 75mm or 50mm.

　　3. The beam type shelf can determine the layer load requirements according to the size of the columns and beams, and has the characteristics of large moment of inertia, strong layer load capacity, and strong impact resistance. The maximum layer load per layer can reach 5000kg under relative design.

　　4. The height of a single column in a crossbeam style shelf can reach up to 12 meters, and the plasticity of a pallet shelf is very large. Based on the pallet shelf, mold shelves, attic shelves, three-dimensional warehouse shelves, etc. can be built, and special oil barrel shelves can also be made.

　　5. Cross beam shelves can effectively increase the storage height of the warehouse and improve the space utilization rate of the warehouse. Suitable for storing various types of goods.

AfterSalesService :

• Heavy duty storage shelves