Heavy duty shelving manufacturing

Description :

　　Characteristics of crossbeam shelves

　　1. The beam type shelf structure is simple, safe and reliable, and can be adjusted and combined freely. It is not limited by the order of items in and out of the warehouse. Widely used in storage modes such as pallet storage and forklift access.

　　2. The post piece of the cross beam rack is composed of the post, cross brace and slant support connected by bolts. The shelf frame is composed of column pieces and C-shaped welded beams, which are fixed with safety pins and have a simple and reliable structure. Each layer can be freely adjusted up and down with a step distance of 75mm or 50mm.

　　3. The beam type shelf can determine the layer load requirements according to the size of the columns and beams, and has the characteristics of large moment of inertia, strong layer load capacity, and strong impact resistance. The maximum layer load per layer can reach 5000kg under relative design.

　　4. The height of a single column in a crossbeam style shelf can reach up to 12 meters, and the plasticity of a pallet shelf is very large. Based on the pallet shelf, mold shelves, attic shelves, three-dimensional warehouse shelves, etc. can be built, and special oil barrel shelves can also be made.

　　5. Cross beam shelves can effectively increase the storage height of the warehouse and improve the space utilization rate of the warehouse. Suitable for storing various types of goods.

　　6. The crossbeam style shelf has a safer appearance and can prevent forklift collisions by adding column foot guards and anti-collision bars. For safer layer loading, auxiliary facilities such as beam supports, shelves, and mesh spans can also be installed on the beams.

　　7. Beam type shelves are low-cost, easy to install and operate, easy to locate, and suitable for any handling tool, making them a widely used type of shelf.

　　8. Cross beam shelves can also be equipped with layer boards, which can be steel plates, dense ammonia plates, or mesh grilles. In order to use trays of different sizes.

　　Cross beam shelving is one of the commonly used types of storage shelving. In the structure of the shelving, the bi-directional cross beam is one of the main components, which places goods on the cross beam and carries the main weight.

　　On the crossbeam of the shelf, units formed by pallets are used as storage positions, so this type of shelf is also called a storage position type shelf. The crossbeam type shelf (storage rack) is welded together with two column clamps and crossbeam rods. The crossbeam is made of two specially designed lap welded beams, which double the thickness of the upper and lower parts of the crossbeam. The main body of the crossbeam shelf is composed of shelf columns and crossbeams, with a simple and clear structure that can freely adjust the height of each layer in multiples of 75mm. It has strong load-bearing capacity and the ability to pick goods. It is widely used in industries such as electronics, home appliances, communications, computers, instruments, household appliances, clothing, automobiles, tires, supermarkets, etc.

　　A、 Post piece: cross beam rack (storage rack) is composed of two posts, cross braces and slant support connected by nylon self-locking bolts. The combined structure effectively prevents the rack from losing stability after the bolts are loosened. There are double rows of rhomboid holes punched on the posts with a pitch of 75mm. Therefore, the cross beam can be freely adjusted up and down in 75mm when it is attached to the posts. The cross-section of the column is composed of 11-13 faces, with a large inertia distance, strong bearing capacity, and strong impact resistance. The crossbeam type shelf column adopts automatic punching and cold bending forming technology to avoid the possibility of cracking and failure due to stress concentration in the column.

　　B、 Beam: The beam type shelf (storage rack) is welded together with two column clamps and beam rods, using two specially designed lap welded beams to double the thickness of the upper and lower parts of the beam. This structure, based on steel structure design theory, fully utilizes the material's load-bearing capacity and has the characteristics of light weight, strong load-bearing capacity, and low cost. The connection between the crossbeam and the column is equipped with a specially designed safety pin with ear tabs. The safety pin with ear tabs cannot be easily pulled out, ensuring that the crossbeam will not fall off after external impact.

　　Composition of beam type shelf structure:

　　1. The cross beam rack is assembled by columns, cross beams, cross braces, slant support and self-locking bolts, which can effectively prevent the instability of the rack caused by the loosening of bolts;

　　2. The crossbeam of the crossbeam type shelf adopts a specially cold-rolled P-type closed beam;

　　3. The beam type shelf structure has the characteristics of simplicity, reliability, light weight, strong bearing capacity, and low cost;

　　4. The column clamp is equipped with a specially designed safety pin when connected to the column, which can ensure that the crossbeam will not fall off under external impact

　　5. The laminated board adopts internationally made strip-shaped laminated boards, which have the characteristics of strong bearing capacity, wear resistance, easy replacement, and low maintenance cost.

　　Cross beam shelving, also known as pallet shelving, is generally stored in pallet units and is suitable for various warehouses. It is a simple and widely used form of shelving. Cross beam shelving is a widely used palletized cargo storage system with strong versatility. Its structure is that the shelves are divided into several rows along the width direction of the warehouse, with a harbor passage in between for stacking cranes, forklifts, or other handling machinery to operate. Each row of shelves is divided into several columns along the longitudinal direction of the warehouse, and further divided into several layers in the vertical direction, forming a large number of storage spaces for storing goods on pallets.

AfterSalesService :

• Heavy duty shelving manufacturing