Cold storage shelf cantilever shelf

Description :

　　Characteristics of cantilever shelves:

　　1. Cantilever shelves are only suitable for storing goods in long strips or rolls;

　　2. Cantilever shelves need to be equipped with handling equipment with wider fork spacing, such as side forklifts with larger fork spacing;

　　3. The height of cantilever shelves is limited, generally below 6m;

　　4. The space utilization rate of cantilever shelves is low, about 35% -50%;

　　5. Cantilever shelf storage types: long strips and long rolls.

　　The structural advantages of cantilever shelves:

　　1. Cantilever shelves can be single-sided or double-sided, and they have the characteristics of structural stability, good load-bearing capacity, and high space utilization. Goods storage and retrieval are carried out by forklifts, cranes, or manual labor;

　　2. The height of cantilever shelves is usually within 2.0 meters (up to 6 meters if accessed by forklifts), the cantilever length is within 1.5 meters, and the load capacity of each arm is usually within 800KG.

　　Cantilever shelves are composed of cantilevers mounted on columns, which can be fixed or mobile. Pipes and sheets are commonly used for storage. According to the carrying capacity, it can be divided into three types: lightweight, medium weight, and heavy weight; According to the structural form, it can be divided into single-sided cantilever shelves and double-sided cantilever shelves.

　　Production process of cantilever shelves:

　　1. The base of the cantilever rack can be made of H-shaped steel or profiles. Choose H-shaped steel according to the corresponding national standard steel based on the load-bearing requirements. Open bolt connection holes on the H-beam to facilitate connection with the column. Weld the bottom plate to connect it, and open expansion bolt holes on the top of the bottom plate to facilitate the connection of the shelf to the ground with expansion bolts. Fixed shelves;

　　2. Cantilever shelves use profiles as the base, and two pieces of C-shaped steel are welded back to back with connecting steel plates. The width of the connecting steel plates is the width of the columns. After welding two pieces of C-shaped steel, open bolt holes at the connection column position for easy connection with the column. Weld the bottom plate to facilitate the connection between the expansion bolt and the ground;

　　3. The cantilevered shelf column is welded together with two pieces of C-shaped steel. C-section steel is made of Q235 strip steel as raw material, rolled into C-section steel by a rolling mill, and then punched out with a cantilever connection control on an automatic punching machine, with a hole spacing of 140mm. If a connecting steel plate is welded to the H-beam below the column using the connection method. If the connection method with the profile is adopted, bolt connection holes will be opened at the connection part below the column.

AfterSalesService :

• Cold storage shelf cantilever shelf