Principle of cantilever shelving

Description :

　　Characteristics of cantilever shelves:

　　1. Using square tube production: Cantilever shelves are made by selecting square tubes that meet the corresponding cantilever layer load requirements, cutting them into the required size, welding anti slip protective plates on one end, and welding U-shaped column connectors on the other end;

　　2. Made of C-shaped steel: Based on the corresponding cantilever layer load requirements, the specifications of the C-shaped steel are first selected for the cantilever rack. After selection, two pieces of C-shaped steel are welded together. After welding, an anti slip protective plate is welded on one end, and a U-shaped column connector is welded on the other end;

　　The cantilever shelf columns are connected to each other using connecting rods, which are generally made of rectangular tubes. To increase safety and stability, a flat iron back pull tab can be added to the connecting rod to tightly fix the column piece;

　　3. All cantilever shelf components are semi-finished products after production and will undergo a subsequent process of spray coating. Before spraying, perform shot blasting with a shot blasting machine to remove oil and rust, and then proceed with spraying. After completion, package and ship.

　　Cantilever shelves are an ideal solution for storing bulky, scattered, or other special products Cantilever shelves are divided into single arm and double arm types, which efficiently store products such as wood, pipes, and long strips Cantilever shelves are made by installing external cantilevers on traditional shelf pillars, and are a type of long shelf.

　　Characteristics of cantilever shelves:

　　1. Cantilever shelves are only suitable for storing goods in long strips or rolls;

　　2. Cantilever shelves need to be equipped with handling equipment with wider fork spacing, such as side forklifts with larger fork spacing;

　　3. The height of cantilever shelves is limited, generally below 6m;

　　4. The space utilization rate of cantilever shelves is low, about 35% -50%;

　　5. Cantilever shelf storage types: long strips and long rolls.

　　Basic structure of cantilever shelf:

　　The column is made of two cold-rolled C-shaped profiles welded face to face. There are double row holes punched on the column with a pitch of 140 (50) mm, so the cantilever beam can be hung on it to adjust the height of each layer up and down. The length of the cantilever shelf can be freely matched, and customers can specify whether an end is required for the cantilever end. The end is divided into welded and plug-in types.

AfterSalesService :

• Principle of cantilever shelving